Innovative Filtrex – IF filter is a wounded depth filter, with end caps, inner and outer guard made from stainless steel. Consisting of a 3-dimensional borosilicate depth media, the IF Filter achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure. During operation, the filter achieves a retention rate of > 99.99998% related to 0.01 µm.
Applications
Features and Benefits
Materials of Construction
Specifications :
Filter media : Borosilicate
Membrane support : Polyester
Inner core : Stainless steel
Outer core : Stainless steel
End caps : Stainless steel
O-rings : Silicone, Buna N, EPDM, Viton
Filtration Area : 494cm² (5,317ft2) per 10” element
Available length : 5-inch, 10-inch, 20-inch, 30 inch
Maximum Differential Pressure : 5bar (73psi), independent of operation pressure of flow direction
Operating Temperature : -20 to 200 ºC (-4 to 392ºF)
Sterilization :
This filter elements are guaranteed for 200 sterilization cycles without loss of integrity.
In-line sterilization with slow speed saturated steam:
max. 121°C (250°F) for 30 minutes
max. 131°C (268°F) for 20 minute
max. 141°C (286°F) for 10 minutes
Autoclave: 125°C (257°F) for 30 minutes
Bacterial Retention : LRV > 7/cm² (1.09in2) for T1 Coliform
Absolute Retention Rate : 99.99998 % related to 0.01µm
Activated Carbon absolute-rated activated carbon filters are designed for the removal of oil vapour and other hydrocarbons. These filter elements consist of a two-stage filtration process. All particles are retained within the nanofiber depth filter media, while the activated carbon adsorbs all oil vapors and gaseous hydrocarbons. The filter can achieve residual oil content of < 0.003 mg/m3 with appropriate pre-filtration.
Applications
Features and Benefits
Materials of Construction
Specifications :
Filter membranes : Borosilicate nanofibers
Membrane support : Polyamide
Support sleeves : Stainless steel
Adsorption stage : carbon embedded in PUR foam
O-rings : Silicone, Buna N, EPDM, Viton
Support ring : Stainless steel
Operating Temperature : 10 to 40ºC (50 to 104ºF)
Retention Rate : Residual oil content of < 0,003 mg/m³, with pre-filtration
Recommended Pre-Filtration : Residual oil content < 0,01 mg/m³
Initial differential pressure at nominal flow : 0.07bar (1.02psi)
