Innovative FiltrexTM Resin Bonded filter cartridge is an asymmetric, resin bonded and supporting core-less depth filter cartridge in different material configurations. From the outside to the inside denser pore structure enables a highly efficient particle retention and excellent dirt holding. The cartridge is ideal for filtration of solvent-based paints, varnishes and resins, even with higher viscosity. Modelling 2 is mainly used in pre-filtration in the food and pharmaceutical sectors.
Innovative FiltrexTM Depth filter cartridges with homogeneous, fibre-free and supporting core-less filter matrix. The heat sealed bicomponent fibres provide an extremely stable construction that supplies reproducible results with high quality filtration. The bicomponent fibre matrix allows high flow rates and offers broad chemical resistance. Innovative FiltrexTM polyoefin is used for food or ultrapure water, ink, coating chemicals, the polyester media is mainly suitable for end-filtration of paints and varnishes.
Innovative FiltrexTM Melt-blown depth filter cartridge with multi-layer structure, which enables a high dirt holding capacity and long service life due to the increasing pore structure from the inside out. Construction of pure polypropylene with support core without any adhesive or binding agents with a high flow rate low differential pressure. Pre-filter element with applications in all industrial sectors. Particularly well suited for filtration of hydrous media such as paints, water and other chemicals.
Innovative FiltrexTM depth filter cartridge is manufactured in a melt-blown process. The continuously increasing inward pore structure provides excellent particle retention and dirt holding capacity. The absolute deposition rate ensures reproducible results. The extraordinarily stable matrix ensures consistently high efficiency and high flow rates even when the differential pressure increases. The allows a use in many critical applications in all industrial sectors, such as fine chemicals, sterile water, photoresists, coatings and food, even in the end-filtration.
Innovative FiltrexTM melt-blown depth filter cartridge made of nylon 6 was developed for use at higher temperatures and for applications with high chemicals resistance, In which polypropylene cannot be used. The increasing inward porosity also ensures good retention rates and high dirt holding. To raise the stability of the filter cartridge, it has an extra support cage made of nylon.
The depth cartridge is manufactured in a patented melt-blown process. The pore structure which is increasing continuously inward, provides excellent particle retention and high dirt holding capacity. The absolute deposition rate ensures reproducible results. The extraordinarily stable matrix ensures consistently high efficiency and high efficiency and high flow rates even when the differential pressure increases. This allows an use in many critical applications in all industrial sectors, such as fine chemicals, sterile water, photoresists, coatings and food, even in the final filtration.
Innovative FiltrexTM Melt-blown large-Scale element with single-layer structure, which enables a high dirt holding capacity and long service life due to the increasing pore structure from the inside out. Construction of pure polypropylene with support core without any adhesive or binding agents with a high flow rate low differential pressure. Pre-filter element with applications in all industrial sectors. Particularly well suited for filtration of hydrous media such as paints, water and other chemicals.
Innovative FiltrexTM Melt-blown depth cartridge with four layered built-up. The different layers with several, graded filter fineness’s allow optimal storage of the burial of dirt particles in the matrix. Thus the filtration efficiency and the service life are significantly higher than comparable wound filter cartridges. This filter is made of 100% polypropylene, without adhesives or binding agents, and thereby complies the requirements for the food industry.
Innovative FiltrexTM Melt-blown large-Scale element with special structure, which enables a high dirt holding capacity and long service life due to the increasing pore structure from the inside out. Construction of pure polypropylene with support core without any adhesive or binding agents with a high flow rate low differential pressure. Pre-filter element with applications in all industrial sectors. Particularly well suited for filtration of hydrous media such as paints, water and other chemicals.
Innovative FiltrexTM Filter cartridge with pleated woven filter medium made of polypropylene fibres. The two-layer structure of the filter matrix, coupled with the high efficiency and long service life, makes this cartridge ideal for pre- and end-filtration in all critical applications. Supporting cage and end-caps are also heat-sealed polypropylene parts. Common applications are pre-filtration in front of membranes, photo emulsions, process solutions, high purity chemicals, deionized water, acids, alkalis, cosmetics, beverages and foods.
Innovative FiltrexTM Granular Activated Carbon filter cartridges are used to remove unwished flavours, oil, fat, organic contaminations as well as reactive compounds (e.g. chlorine, hydrazine) from drinking water and hydrous liquids or gases. The medium to be filtered enters from the bottom of the filter cartridge and flows through the activated carbon bed axially. Thereby the maximum contact time with the activated carbon is achieved. The granulated activated carbon is fixed in position by a foam plastic inlay, it effectively prevents the formation of a bypass. A built-in 5-micron post-filter prevents leakage of activated carbon pieces.
Innovative FiltrexTM ACF filter cartridges consist of a compressed carbon block and serve to remove unwished flavours, oil, fat, organic contaminations as well as reactive compounds (e.g. chlorine, hydrazine) from drinking water and hydrous liquids or gases. Due to the patented manufacturing process, these cartridges have an extremely high chlorine and dirt-holding capacity. The flow is radial from the out-side inwards. A built-in 5-micron post-filter prevents leakage of activated carbon pieces.
Innovative FiltrexTM filter elements are made of a novel patented filter material based on cellulose. This material can bind dissolved, emulsified and dispersed oil from water by chemical adsorption. In only one cycle, a retention rates up to 95% is achieved. The efficiency can be increased by cascading two or three systems. The unique design allows significant higher flow rates compared to activated carbon at minimum differentials pressure. The formation of any by-pass channels can be excluded. The application range covers the chemical and metal processing industries. The material can be used e.g. to clean contaminated surface water, bilge water in ships, condensate from compressor, and for many other applications.
Hydraulic lube filters are ideal for your oil reclamation and maintenance operations.Innovative Filtrex series filter cartridges, and are rated at 1µ absolute to 100µ nominal. They seal on the housing’s elevated pedestal and are retained by a threaded post and cap assembly. Keep your filtration process cost effective without sacrificing quality.
Specifications
Filtration Ratings : 95% at 1, 5, 10, 20, and 30µm
Filter Media : Phenolic Impregnated Cellulose
Perforated Sleeve & Core, End Caps : ETP Steel
Adhesive : Thermosetting PVC
End Seals : Buna-N Gasket Standard
Recommended Operating Conditions : Maximum Temperature : 250°F (121°C)
Change-Out ∆P : 25 PSID (1.7 BAR)
Flow Rate : 50 GPM – 100 GPM
Size : 6” OD x 18.1” Long , 6” OD x 36.1” Long and ID is 2-5/8” or 2-1/8”
Applications
INNOVATIVE FILTREX™ ccontinuous-wound cartridge elements come in a wide range of materials, lengths, and micron retention ratings. A highly innovative single-core design is used, eliminating the “joints” common in other manufacturers’ elements at 10″ intervals. Materials of these elements include cotton, nylon, glass, and polypropylene.
Their lengths range form 9-3/4 inches to 40 inches, fitting most cartridge housings in the field. Micron retention ratings are from 200 down to 0.5 microns. These elements offer true depth filtration, higher efficiency, lower pressure drop, and greater solids holding capacity than standard elements and competitive prices.
A full range of center core materials are offered to meet specific filtration requirements. Extended core materials are also available upon request.
The center core covering, for reducing fiber migration, is compatible with and equivalent in ratings to the micron rating of the filter element. The inside diameter of all cartridges is 1 inch and the outside diameter is 2-1/2 inches.
