For Research and Industrial Applications (Customized Membranes Available)
Innovative FiltrexTM High-capacity high performance filter cartridges with a radial pleating construction, resulting in a much higher surface area than conventional cartridge filter systems produced in a given space. Each high-performance filter cartridge contains up to 18 m2 filter area. The large surface area allows a high flow rate and high dirt holding capacity. Each cartridge can charge up to 11 kg ACFTD test dust before the maximum differential pressure is reached to change. The filter material consists of fibres having precisely controlled diameter in order to achieve precise micro retention values. This leads consistent, high-quality filtration results.
Innovative FiltrexTM High Flow high performance filter cartridges with a radial pleating construction, resulting in a much higher surface area than conventional cartridge filter systems produced in a given space. The easy-to-use cartridge design with a diameter of 165 mm and 40” or 60” length. The large filter area and the special support adaptor allow maximum flow rate of up to 113 m3/h and a high dirt holding capacity. With only one High Flow performance filter cartridge up to 24 standard filter cartridges of the same length can be replaced. In addition, the system saves space and high filter changing costs.
Innovative FiltrexTM stainless-steel filter cartridges are made of stainless-steel wire mesh, which is applied to a stable supporting cage of perforated sheet. Fine mesh is equipped additionally with drainage mesh. Depending on the micron rate square mesh (>90 microns) or twilled weave mesh is used. The filter cartridges are regenerative and can be easily cleaned by various methods (backflushing, with high-pressure, ultrasonic or acid bath.) they are used especially at high temperatures, at high viscosities or corrosive media. Stainless steel filter cartridges are supplied with DOE end-caps or common adaptors.
Innovative FiltrexTM stainless steel sintered cartridges are made of multiple layers of sintered stainless-steel mesh, which is applied to a stable supporting cage. Shifting the various sintering filter layers against one another is not possible, which results consistent, reproducible results of filtration. Depending on the Topmesh or Absolta mesh are used for the production. The filter cartridges are regenerative and can be easily cleaned by various methods (backflushing, with high-pressure, ultrasonic or acid bath.) they are used especially at high temperatures, at high viscosities or corrosive media. Stainless steel is supplied with DOE end-caps or common adaptors.
Innovative FiltrexTM Depth filter modules designed for use in closed systems, combined with a simple and safe handling. The efficiency of this filter material is improved by additional electrokinetic forces (Zeta potential). Thereby particles are retained, which are smaller than the actual pore size of the mechanical filter matrix. The mechanism ensures excellent filtration quality and high holding capacity up to 4 kg / m2. The modules are available double open end (flat adapter) or with bayonet adaptor.
High Purity Pleated Polypropylene Cartridges are designed for use in most applications where absolute rated pleated filtration is needed. Designed to hold 6.5 square feet of filtration media, our High Purity PP cartridges are a great value. These cartridges are constructed with 100% polypropylene materials and assembled using the latest thermal bonding equipment. PP cartridges are offered in both absolute (to 99.98%) and nominal (90%) retention efficiencies.
High Purity Pleated Polypropylene Cartridges are designed for use in most applications where absolute rated pleated filtration is needed. Designed to hold 6.5 square feet of filtration media, our High Purity PP cartridges are a great value. These cartridges are constructed with 100% polypropylene materials and assembled using the latest thermal bonding equipment. PP cartridges are offered in both absolute (to 99.98%) and nominal (90%) retention efficiencies.
Innovative FiltrexTM Pharma Grade Depth filter module made of cellulose fibres, inorganic filter additives (diatomaceous earth) and cationic binder resins. Core support, drainage and edge grouting are in this Series module made of polyamide. This allows to operate at higher temperatures and critical applications where polypropylene is not stable enough. The depth filter diameter of 12” or 16” and packaged according to the application with a different number of cells. The large range of deposition rates allows the use in many applications.
Innovative FiltrexTM Pleated filter capsules with PTFE or PP matrix. Specially designed for small filtration amounts and do not require any further pressure vessel. Filter capsules are commonly used in laboratories, but also for ventilation of containers. Housing and matrix are free of metal components and because of the heat-sealed construction free of adhesives and binding and binding agents
Innovative FiltrexTM Activated carbon depth filter module with high adsorptive capacity. Manufactured under specific criteria of purity. Consists of activated carbon, purified and bleached cellulose and diatomaceous earth. The applications are mainly in the diatomaceous of chemicals, cosmetics, sugar syrup and drinks, but also in the blood treatment and in the dechlorination of water.
Welcome to WordPress. This is your first post. Edit or delete it, then start writing!